| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录，发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 1300 x 700 x 380 mm | |
|---|---|---|
| Tabletop thickness | 50 mm | |
| Side panel wall thickness | 30 mm | |
| Open recessed cavity dimensions | 1220 x 620 x 280 mm | |
| Floor to cavity bottom clearance | 50 mm | |
| Top overhang around base | 10 mm | |
| Corner radius | 2 mm | |
| Open cavity front opening height | 280 mm | |
| Floor contact base footprint | 1240 x 640 mm | |
| Finished Top Thickness | Approx. 25-45 mm | |
| Effective Knee Clearance | Approx. 620-680 mm high and 700-900 mm wide per main seat | |
| Leg / Support Section | Approx. 40-80 mm main section with 1.2-2.0 mm metal wall | |
| Cable Opening Size | Approx. 60-80 mm diameter; cable tray depth approx. 80-120 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Net weight range | 32-48 kg | |
|---|---|---|
| Tabletop distributed static load capacity | 50 kg | |
| Recommended user capacity | Suitable for 3-5 seating positions | |
| Surface heat resistance (short term) | 80°C | |
| Surface abrasion resistance reference | 2000 cycles | |
| Floor load distribution | Evenly distributed across full base perimeter | |
| Stability tilt resistance | Withstands 15° lateral tilt without tipping when loaded to rated 50kg distributed capacity | |
| Top Static Load Reference | Approx. 80-150 kg uniformly distributed | |
| Drawer Slide Load / Life | Approx. 25-45 kg/pair; 30,000-50,000 cycles | |
| Hinge Opening Life | Acceptance target 40,000-80,000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 3-5 years; hardware 2-3 years; finish 1-2 years |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Tabletop substrate | 18mm MDF core | |
|---|---|---|
| Side/base panel substrate | 15mm MDF or particleboard | |
| Exterior finish | Matte polyurethane lacquer, light taupe/grey color | |
| Interior cavity finish | Matching matte taupe lacquer | |
| Bottom edge floor contact | 4mm thick non-slip EVA glide pads | |
| Panel joint construction | Mitered corner joints with adhesive and dowel reinforcement | |
| Coating thickness | 0.15-0.2mm per coat, 3-coat application | |
| Edge treatment | Squared polished lacquered edges, no separate edge banding | |
| Cavity interior shelf base | 12mm MDF panel fixed to side panels 50mm above floor level | |
| Primary Panel Thickness | Approx. 18-25 mm; load-bearing top may use 25-40 mm composite build-up | |
| Edge Band Thickness | Approx. 1.0-2.0 mm | |
| Metal Frame Wall Thickness | Approx. 1.2-2.0 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 3-6 top finishes and 1-3 frame colors |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Storage configuration | Fixed open front recessed cavity, no drawers, doors, or adjustable shelves | |
|---|---|---|
| Mobility | Static non-caster design, requires lifting for repositioning | |
| Surface use case | Flat level top for placing beverages, books, decorative objects, and small table lamps | |
| Assembly requirement | Knock-down or fully assembled delivery option | |
| Adjustable features | No height adjustment, extension, or tilt mechanisms | |
| Cable management | No integrated cable ports or routing | |
| Floor protection function | EVA glide pads raise base 1mm above floor surface to prevent scuffing on hardwood, tile, and low-pile carpet floors, no sharp exposed substrate edges at floor contact points | |
| Cable Management Capacity | Reference capacity 6-10 power/data cables; tray load approx. 5-10 kg | |
| Reference Reassembly Count | Main joints should support 3-5 controlled assembly cycles |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Carton count | 1 unit per carton | |
|---|---|---|
| Carton dimensions | Approx. 1400 x 800 x 480 mm | |
| Gross weight per carton | Approx. 40-56 kg | |
| CBM per unit | Approx. 0.54 CBM | |
| Assembly time for flat-pack variant | 15-20 minutes for 1 person with included hardware | |
| Loading quantity (40ft HQ container) | Approx. 120 units | |
| Reference Package Count | 1 set / 1-2 cartons | |
| Reference Assembly Time | Approx. 15-40 minutes per set | |
| Reference Package Dimensions | Approx. 1300-2100 × 800-1100 × 150-300 mm | |
| Reference Packaged Gross Weight | Approx. 35-90 kg/set in 1-2 cartons |
推荐空间 / 目标用户 / 使用方式
| Residential living room use | Positioned centered in front of 3-seat sofas or sofa+armchair seating clusters, at ergonomic height for reaching items while seated | |
|---|---|---|
| Luxury minimalist/modern Italian style interiors | Matches matte taupe finish, clean block form, and no decorative hardware for high-end residential or show home settings | |
| Lounge and reception waiting areas | Suitable for low-traffic corporate reception or executive lounge spaces paired with upholstered leather seating | |
| Recommended pairings | Pairs with low-profile leather or fabric upholstery sofas with 40-45cm seat height, maintaining 20-25mm ergonomic height difference between seat and tabletop | |
| Surface use restrictions | Not suitable for cutting, hot cookware directly placed on surface, or heavy loads over 50kg | |
| Corporate executive lounge reception areas | Suitable for low-traffic executive lounge or VIP reception spaces paired with upholstered leather seating, rated for light commercial use with 50kg load capacity | |
| Open storage use cases | Recessed cavity suitable for storing coffee table books, throw blankets, remote controls, or small decorative baskets, with full front access for easy retrieval |
欧洲市场准入与化学品要求
| EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables | Applicable if specified for contract/hospitality use, covering static load and stability requirements | |
|---|---|---|
| EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | Applies to residential use stability and structural performance for coffee tables |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to dimensional tolerance, surface coating quality, and structural strength requirements for wooden residential coffee tables | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable standards and test results require confirmation | |
| GB/T 4893.4-2013 Test of surface coatings of furniture - Part 4: Determination of adhesion | Applicable for verifying lacquer coating adhesion to MDF substrates | |
| GB/T 4893.8-2013 Test of surface coatings of furniture - Part 8: Determination of abrasion resistance | Applicable for measuring surface wear performance of the matte lacquer top |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017 General technical requirements for wooden furniture：Applies to dimensional tolerance, surface coating quality, and structural strength requirements for wooden residential coffee tables； 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture：Applicable standards and test results require confirmation； 3. GB/T 4893.4-2013 Test of surface coatings of furniture - Part 4: Determination of adhesion：Applicable for verifying lacquer coating adhesion to MDF substrates； 4. GB/T 4893.8-2013 Test of surface coatings of furniture - Part 8: Determination of abrasion resistance：Applicable for measuring surface wear performance of the matte lacquer top； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具
关注我们