| Submitted | Field | Original | 修改后参数 | Note / Status |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 1800 x 680 x 800 mm | |
|---|---|---|
| Single seat width | 570 mm | |
| Seat height from floor | 430 mm | |
| Seat depth | 480 mm | |
| Backrest height above seat | 420 mm | |
| Armrest height above seat | 220 mm | |
| Leg footprint width (per end frame) | 620 mm | |
| Divider gap between adjacent seats | 20 mm | |
| Floor glide diameter | 50 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Product net weight | 28 kg | |
|---|---|---|
| Static load per seat | 200 kg | |
| Total static bench load capacity | 600 kg | |
| Recommended seated users | 3 | |
| Seat panel surface static friction coefficient | 0.5 | |
| Warranty period for structural frame | 5 years | |
| Number of standard finish color options | 4 | |
| Static load rating per individual seat | 200 kg | |
| Rated occupant capacity | 3 | |
| Seat surface static friction coefficient | 0.5 |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back panels | 1.5mm thick cold-rolled steel sheet, powder-coated matte gray finish | |
|---|---|---|
| Support frame and legs | 2.0mm thick cold-rolled steel tube, silver powder-coated corrosion-resistant finish | |
| End armrests | Integral formed steel tube matching frame finish, welded to end leg assemblies | |
| Seat dividers | Raised formed steel edge integrated into seat/back panels | |
| Leg connection brackets | 3mm thick stamped steel plates, black anti-corrosion coating at frame joints | |
| Floor glides | Injection-molded nylon with non-marking rubber base | |
| Frame surface coating | Electrostatic polyester powder coating, 80μm thickness | |
| Welded joint treatment | Ground smooth seams with full perimeter welds at all tube connections | |
| Seat and backrest panels | 1.5mm thick cold-rolled steel sheet, matte gray electrostatic powder-coated finish | |
| Support frame and end legs | 2.0mm thick die-cast aluminum alloy, silver powder-coated corrosion-resistant finish | |
| Integrated seat dividers | Raised formed steel edge integrated into seat/back panel stamping | |
| Frame connection brackets | 3mm thick stamped steel plates, black anti-corrosion coating at all beam-to-leg joints |
Adjustment / rotation / tilt / mobility / storage features
| Fixed non-reclining structure | Rigid welded frame with no moving parts for zero maintenance in high-traffic areas | |
|---|---|---|
| Individual separated seating | Raised dividers between seats to prevent cross-user contact and define personal space | |
| End-mounted transfer armrests | Armrests fitted to both outer seats to assist users standing and sitting, no armrests between seats | |
| Non-slip floor anchoring compatibility | Pre-drilled glide bases allow permanent bolting to hard floors for anti-tip security in public spaces | |
| Stackable knock-down shipping | Disassembled frame and panels for compact transport, simple bolt-together assembly on site | |
| Easy clean surface | Smooth non-porous powder-coated surfaces that can be wiped or pressure-washed without damage | |
| Anti-tip splayed leg design | Angled outward leg geometry to eliminate forward/backward tipping risk under uneven load | |
| Fixed rigid non-reclining structure | Fully welded bolted frame with zero moving adjustment parts to deliver maintenance-free performance in high-traffic unattended areas | |
| Zone-divided individual seating | Raised integrated dividers between adjacent seats to prevent cross-user contact and clearly define personal seating space | |
| Transfer-assist end armrests | Ergonomically angled armrests installed only on both outer seats to support user sit-to-stand transfers, no armrests between middle seats to maximize seating flexibility | |
| Floor anchor compatibility | Pre-drilled mounting holes in glide bases allow permanent bolting to concrete or hard floors to deliver anti-tip security in high-traffic public spaces | |
| Flat-pack knock-down delivery | Disassembled beam, leg, and panel components for compact transport, requiring only bolt-together assembly on site without specialized tools |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 carton | |
|---|---|---|
| Shipping carton dimensions | 1850 x 700 x 180 mm | |
| Gross shipping weight | 32 kg | |
| Shipping volume per unit | 0.233 CBM | |
| Required assembly time per unit | 30 minutes | |
| 20ft GP container loading quantity | 120 units | |
| 40ft HQ container loading quantity | 290 units | |
| Packaging material | 5-layer corrugated carton with EPS foam corner protection and plastic film wrapping | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Hospital outpatient waiting areas | Non-porous cleanable surfaces and high load capacity suited for continuous high-turnover healthcare use | |
|---|---|---|
| Airport, railway and bus terminal waiting zones | Low-maintenance fixed structure and anti-tip design suitable for unattended public transport hubs | |
| Bank, government service hall queue areas | Neutral matte gray finish and defined individual seats support orderly public service environments | |
| Office reception and visitor waiting spaces | Compact footprint provides 3 seats per unit for temporary visitor seating in entrance areas | |
| School and university common areas | Rigid welded construction resists vandalism and heavy use in student-facing public spaces | |
| Clinic and outpatient pharmacy waiting rooms | Smooth wipe-clean surfaces allow frequent disinfection to meet healthcare hygiene standards | |
| Hospital outpatient department waiting areas | Non-porous disinfectable surfaces and 600kg total load capacity support continuous high-turnover healthcare use, withstanding daily clinical cleaning protocols | |
| Airport, railway, and intercity bus terminal waiting zones | Zero-maintenance fixed structure and anti-tip splayed leg design deliver reliable performance in unattended high-footfall public transport hubs |
European market access and chemical requirements
| EN 16139:2013 Furniture - Strength, durability and stability - Non-domestic seating | Applicable for non-domestic public seating stability, static load and fatigue testing | |
|---|---|---|
| EN 13722:2004 Furniture - Assessment of surface resistance to cold liquids | Applicable to powder-coated surface resistance to cleaning agents and common spills | |
| EN 1022:2018 Domestic and non-domestic seating - Determination of stability | Applicable to verify anti-tip performance under all normal user loading conditions |
US and Canada office-furniture standards
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for metal furniture | Applicable to structural integrity, coating adhesion, and dimensional tolerance for this metal waiting bench | |
|---|---|---|
| GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools | Applicable for seat static load, backrest static load, and leg strength testing | |
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable for non-metal component hazardous substance limits if composite panels are used | |
| GB/T 4893.4-2013 Test of surface coatings for furniture - Part 4: Determination of adhesion | Applicable to verify powder coating adhesion strength to resist chipping in high-traffic use |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for metal furniture: Applicable to structural integrity, coating adhesion, and dimensional tolerance for this metal waiting bench; 2. GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools: Applicable for seat static load, backrest static load, and leg strength testing; 3. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applicable for non-metal component hazardous substance limits if composite panels are used; 4. GB/T 4893.4-2013 Test of surface coatings for furniture - Part 4: Determination of adhesion: Applicable to verify powder coating adhesion strength to resist chipping in high-traffic use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool3-Seater Metal Frame Waiting Bench, Steel frame.
Follow Us